Location: Pumps » Industry » Civil engineering

Civil engineering

3/4"-EQR-16-4

Qr 0,65 l/s
Hmax 40 m
U 400 V
Tmax 50 °C
weight 13,8 kg with 10m cable

Application

Pumps are destined for pumping fresh and service water, dung water, sludge, liquid manure and thick homogenous liquids with solid particles up to size 5 mm. Possible application e.g. during drainage of flooded spaces, pumping-off underground and wastewater, spray irrigation and watering gardens, pumping out of waste water and sludge sump pits. This pump features a simple design and long service life.

Design

Progressive cavity pump

Branches

House and garden, water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

3/8"-EQR-1,6-10

Qr 0,085 l/s
Hmax 100 m
U 400 V
Tmax 50 °C
weight 10,2 kg with 10m cable

Application

These pumps are destined namely for conveying very small amount of a liquid at supply pressure up to 1MPa. They are used to advantage for chemical spraying against tree, bush and plant borers. Good help for gardeners, small growers, etc. Further applications of these pumps can be for sanitation, lime milk whitening, for spraying painter’s colours, bleaching clays, kaolin and other coating compositions being watered down.

Design

Progressive cavity pump

Branches

House and garden, water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

Exchangeable hydraulics 3/8" for pump 3/4"-EQR-16-4

Qr 0.09 l/s
Tmax 50 °C
weight 2.5 kg

Application

Exchangeable hydraulics of pump 3/8”-EQR by which the part of pump ¾”-EQR-16-4 can be replaced to gain change of parameters while keeping the whole motor unit in unchanged and good condition. Exchangeable hydraulics can be operated in the same range as given at the pumps 3/8”-EQR.

Design

Progressive cavity pump

Branches

House and garden, water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2 3

Lowering Device for Pumps GF.U, GFZP-050

Application

Lowering gear for sludge pumps GF.U, GFZP-050 can be purchased separately. As a part of deliveries there are single components of the lowering device that can be assembled by the operators themselves, according to the delivered chart. The parts of deliveries are the frame, bends, suspensions, bearing brackets, guide gibs. Guide rods are not delivered.

Design

Lowering device of sludge pumps

Branches

House and garden, water resources management, civil engineering, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2 3

GFDF-032-41-LC-N (230V)

Qr 2,8 l/s
Hmax 9 m
U 230 V
Tmax 40 °C
weight 11,5 kg with 10m cable

Application

Small submersible pumps are destined for pumping polluted waste water, e.g. faeces, sludge containing small-sized fragmented solids up to dia. 10 mm. The pumps are provided with a disintegrator (a grinder) for grinding solids being contained in a pumped stuff. There are overcurrent and thermal protection of klixon type built into the motor winding, so it is not possible to ensure another special protection of the pumps. On the customer’s request it is possible to deliver these pumps with and/or without a float.

Design

Submersible sludge pump

Branches

House & Garden
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

GFDF-032-41-LC-N (400V)

Qr 3,5 l/s
Hmax 10,3 m
U 400 V
Tmax 40 °C
weight 12,2 kg with 10m cable

Application

Small submersible pumps are destined for pumping polluted waste water, e.g. faeces, sludge containing small-sized fragmented solids up to dia. 10 mm. The pumps are provided with a disintegrator (a grinder) for grinding solids being contained in a pumped stuff.

Design

Submersible sludge pump

Branches

House & Garden
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2

Top Previous  2  3  4  5  6  7  8  9  10  Next Bottom 
Items 31 - 36 from 66

Home | contacts

© Copyright 2009 SIGMA 1868 - all rights reserved - phone: 585 651 302, email: