Location: Pumps » Industry » Civil engineering

Civil engineering

1 1/2"-EBL

Qr 0,2-0,09 l/s
Pmax 1 MPa
U 400 V
Tmax 70 °C
weight 72 kg

Application

Pump set is destined for plastering, namely spackles for internal plasters or final outside finishes. And further, it can be used for conveying heavy and pulpy stuffs without corrosive effects, with grain sizes of mechanical admixtures up to 5mm

Design

Progressive cavity pump with open hopper

Branches

Civil engineering, water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2

100-EFS-1000

Qr 1,7-12 l/s
Pdo 1,2 MPa
max. diameter of grains 7 mm
max. length of particles 80 mm

Application

These pumps can be applied for conveying liquids and other stuffs that can be thin, viscous, clean, as well as polluted and/or abrasive ones with a gas volume, liquids with tendency to foaming, or fibrous liquids and solids. Specification of single pumps using shall be discussed with the Producer by reason of reaching the best design of hydraulics, pumped liquids and required parameters. Pumps are destined for max. supply pressures 6, 12 bar, according to the customer’s wish they are provided with either a mechanical seal or cord-type packing. On the customer’s request it is possible to deliver these pumps in their stainless workmanship version.

Design

Progressive cavity pump

Branches

Water resources management, civil engineering, mining industry, foodstuff industry, chemical industry
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

125-EFS-2000

Qr 2,8-19 l/s
Pdo 0,6 MPa
max. diameter of grains 10 mm
max. length of particles 100 mm

Application

čerpadla lze použít k dopravě kapalin a látek jak řídkých, tak velmí viskózních, čistých i abrazivních s obsahem plynů, kapalin mající sklon k pěnění s obsahem vláknitých a pevných částic. Specifikaci použití jednotlivých čerpadel nutno projednat s výrobcem z důvodu vhodně navržené hydrauliky, čerpané kapaliny a požadovaných parametrů.
Čerpadla jsou dodávána pro max. dopravní tlaky 6, 12 barů dle požadavků zákazníka s mechanickou nebo šňůrovou ucpávkou. Na přání zákazníka je možné dodat čerpadla v nerezovém provedení.

Design

Progressive cavity pump

Branches

Water resources management, civil engineering, mining industry, foodstuff industry, chemical industry
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

32-EFS-32

Qr 0,18-1,2 l/s
Pdo 2,4 MPa
max. diameter of grains 2 mm
max. length of particles 25 mm

Application

These pumps can be applied for conveying liquids and other stuffs that can be thin, viscous, clean, as well as polluted and/or abrasive ones with a gas volume, liquids with tendency to foaming, or fibrous liquids and solids. Specification of single pumps using shall be discussed with the Producer by reason of reaching the best design of hydraulics, pumped liquids and required parameters. Pumps are destined for max. supply pressures 6, 12, 14 bar, according to the customer’s wish they are provided with either a mechanical seal or cord-type packing. On the customer’s request it is possible to deliver these pumps in their stainless workmanship version.

Design

Progressive cavity pump

Branches

Water resources management, civil engineering, mining industry, foodstuff industry, chemical industry
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2 3 4

40-EFS-63

Qr 0,28-1,9 l/s
Pdo 2,4 MPa
max. diameter of grains 2,5 mm
max. length of particles 30 mm

Application

These pumps can be applied for conveying liquids and other stuffs that can be thin, viscous, clean, as well as polluted and/or abrasive ones with a gas volume, liquids with tendency to foaming, or fibrous liquids and solids. Specification of single pumps using shall be discussed with the Producer by reason of reaching the best design of hydraulics, pumped liquids and required parameters. Pumps are destined for max. supply pressures 6, 12, 14 bar, according to the customer’s wish they are provided with either a mechanical seal or cord-type packing. On the customer’s request it is possible to deliver these pumps in their stainless workmanship version.

Design

Progressive cavity pump

Branches

Water resources management, civil engineering, mining industry, foodstuff industry, chemical industry
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

50-EFS-125

Qr 0,45-3 l/s
Pdo 2,4 MPa
max. diameter of grains 3 mm
max. length of particles 40 mm

Application

These pumps can be applied for conveying liquids and other stuffs that can be thin, viscous, clean, as well as polluted and/or abrasive ones with a gas volume, liquids with tendency to foaming, or fibrous liquids and solids. Specification of single pumps using shall be discussed with the Producer by reason of reaching the best design of hydraulics, pumped liquids and required parameters. Pumps are destined for max. supply pressures 6, 12, 14 bar, according to the customer’s wish they are provided with either a mechanical seal or cord-type packing. On the customer’s request it is possible to deliver these pumps in their stainless workmanship version.

Design

Progressive cavity pump

Branches

Water resources management, civil engineering, mining industry, foodstuff industry, chemical industry
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

Top Previous  1  2  3  4  5  6  7  8  9  Next Bottom 
Items 7 - 12 from 66

Home | contacts

© Copyright 2009 SIGMA 1868 - all rights reserved - phone: 585 651 302, email: