Location: Pumps » Industry » Civil engineering

Civil engineering

32-GFTU-95-11-LA

Qmax 5,5 l/s
Hmax 11,1 m
U 400 V
Tmax 40 °C
weight 17 kg with 10m cable

Application

Pumps are destined for pumping polluted wastewater, faeces and sludge with the total portion of non-abrasive sludge dry residues max. 10 percent by weight, with a content of fine fragmented materials, as paper, street washoffs, or a smaller amount of loam, ash, sand, and so on. Thanks to its parameters and design this pump can be used to advantage in one-family houses and weekend houses, gardens, as well as in places with insufficient room (excavations, pits).

Design

Submersible sludge pump

Branches

House and garden, water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2

40-GFZU-136-5-LU

Qmax 3,7 l/s
Hmax 16,8 m
U 400 V
Tmax 40 °C
weight 24 kg with 10m cable

Application

Submersible sludge pumps destined for pumping fresh and slightly polluted water and sludge containing solids of non-abrasive character up to the size 5mm, as well as long fibrous stuffs of organic origin, odds and ends without abrasive solids, thick strings and cords, and synthetic fibres, and so on. Pumps are advantageous to waste water treatment plants, pumping from overground and underground resources (rivers, ponds, pools, cellars, water wells, etc.). They were designed for versatile applications by reason of sufficient capacity, weight and manufacture qualities. On request it is possible to supply them with a float.

Design

Submersible sludge pump

Branches

House and garden, water resources management, civil engineering, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2 3

50-GFZU-136-5-LU Version SZ for wet pit installation with lowering device

Qmax 4 l/s
Hmax 19,8 m
U 400 V
Tmax 40 °C
weight 24 kg with 10m cable

Application

Submersible sludge pumps destined for pumping wastewater, faeces and non-treated sludge, as well as long fibrous stuffs of organic origin, odds and ends without abrasive solids, thick strings and cords, and synthetic fibres, and so on. Pumps are advantageous to waste water treatment plants, pumping from overground and underground resources (from rivers, ponds, pools, cellars, water wells, etc.). They were designed for versatile applications by reason of sufficient capacity, weight and manufacture qualities.

Design

Submersible sludge pump

Branches

House and garden, water resources management, civil engineering, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2 3 4

KDDF-050-51-N

obrázek není k dispozici
Qr 4 l/s
Hr 24 m
U 400 V
Tmax 35 °C
weight 35 kg with 10m cable

Application

Pumps are destined for pumping polluted wastewater with a content of sludge up to 30 percent and sand or similar materials of abrasive effect up to 30 percent by weigh. These pumps can be used to advantage for water drainage out of flooded spaces, cleaning boreholes up to 8”, as well as excavations, and so on.

Design

Submersible Sludge Pump

Branches

Water resources management, agriculture, open pit mines
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos:

KDDF-080-01-LR-E

Qr 8 l/s
Hr 19 m
U 400 V
Tmax 40 °C
weight 56 kg with 50m cable

Application

Submersible sludge pump in explosion-proof workmanship, destined for working in mines with methane occurrence (Group I – mine premises with danger of methane explosion, except of premises with high risk of methane explosion SNM3) and in premises with explosion hazard (Group II – premises other than mines with methane occurrence), zones 1 and 2 according to the ČSN EN 6079-10. Designation of explosion proofness is IM2ExdI/II2GExdIIBT4. Pump is destined for installation into wet pits and for pumping hydro mixtures with content of sludge, sand, coal dust, and so on.

Design

Submersible sludge pump

Branches

Water resources management, agriculture, mines and metallurgical plants
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2

KDDF-080-02-N

Qr 14 l/s
Hr 28 m
U 400 V
Tmax 40 °C
weight 73,5 kg with 50m cable

Application

Submersible sludge pumps are destined for explosion-proof environments, for pumping water polluted with a content of sludge, clay, sand, fine crumbles and similar materials of abrasive effect with the total portion of admixtures max. 30 percent by weigh. These pumps can be used to advantage in civil engineering for excavation and drainage works, removal of flood disaster consequences, etc.

Design

Submersible sludge pump

Branches

Water resources management, agriculture, civil engineering
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

Top Previous  3  4  5  6  7  8  9  10  11  Next Bottom 
Items 55 - 60 from 66

Home | contacts

© Copyright 2009 SIGMA 1868 - all rights reserved - phone: 585 651 302, email: