Civil engineering - Spraying painter's colours

1"-EBAW-16-6-GV-82 (230V)

Qr 0,37 l/s
Pdo 0,6 MPa
U 230 V
Tmax 70 °C
weight 23 kg

Application

Pump is destined for spraying painter’s colours for plasters and facades of buildings. It can pump glue, emulsion, kaolin, latex paints, and even milk of lime and other paint’s solutions watered down that can also contain some fine mechanical admixtures up to grain sizes 0.5mm. Max. temperature of a pumped liquid is 70°C, max. permissible temperature of working environment is 40°C.

Design

Progressive cavity pump

Branches

General engineering
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2

1"-EBAW-16-6-GV-82 (400V)

Qr 0,37 l/s
Pdo 0,6 MPa
U 400 V
Tmax 70 °C
weight 23 kg

Application

Pump is destined for spraying painter’s colours for plasters and facades of buildings. It can pump glue, emulsion, kaolin, latex paints, and even milk of lime and other paint’s solutions watered down that can also contain some fine mechanical admixtures up to grain sizes 0.5mm. Max. temperature of a pumped liquid is 70°C, max. permissible temperature of working environment is 40°C.

Design

Progressive cavity pump

Branches

General engineering
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

3/4"-EQR-16-4

Qr 0,65 l/s
Hmax 40 m
U 400 V
Tmax 50 °C
weight 13,8 kg with 10m cable

Application

Pumps are destined for pumping fresh and service water, dung water, sludge, liquid manure and thick homogenous liquids with solid particles up to size 5 mm. Possible application e.g. during drainage of flooded spaces, pumping-off underground and wastewater, spray irrigation and watering gardens, pumping out of waste water and sludge sump pits. This pump features a simple design and long service life.

Design

Progressive cavity pump

Branches

House and garden, water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

3/8"-EQR-1,6-10

Qr 0,085 l/s
Hmax 100 m
U 400 V
Tmax 50 °C
weight 10,2 kg with 10m cable

Application

These pumps are destined namely for conveying very small amount of a liquid at supply pressure up to 1MPa. They are used to advantage for chemical spraying against tree, bush and plant borers. Good help for gardeners, small growers, etc. Further applications of these pumps can be for sanitation, lime milk whitening, for spraying painter’s colours, bleaching clays, kaolin and other coating compositions being watered down.

Design

Progressive cavity pump

Branches

House and garden, water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

Exchangeable hydraulics 3/8" for pump 3/4"-EQR-16-4

Qr 0.09 l/s
Tmax 50 °C
weight 2.5 kg

Application

Exchangeable hydraulics of pump 3/8”-EQR by which the part of pump ¾”-EQR-16-4 can be replaced to gain change of parameters while keeping the whole motor unit in unchanged and good condition. Exchangeable hydraulics can be operated in the same range as given at the pumps 3/8”-EQR.

Design

Progressive cavity pump

Branches

House and garden, water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2 3

 1 
Items 1 - 5 from 5

Home | contacts

© Copyright 2009 SIGMA 1868 - all rights reserved - phone: 585 651 302, email: