Mines and metallurgical works - Pumping off mine waters

65-EFT-250

Qr 0,8-5,2 l/s
Pdo 1,2 MPa
max. diameter of grains 4 mm
max. length of particles 50 mm

Application

This pump can be used for conveying liquids and thin as well as highly viscous materials, clean and abrasive stuffs with content of gases, liquids with foaming power containing fibrous materials and solids. Specification of using single pumps shall be negotiated with the Producer in order to design the best hydraulics according to pumped liquids and required parameters.

Design

Progressive cavity pump

Branches

Water resources management, civil engineering, mining industry, foodstuff industry, chemical industry
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2 3 4

80-EFT-500

Qr 1,2-7 l/s
Pdo 1,2 MPa
max. diameter of grains 5 mm
max. length of particles 60 mm

Application

This pump can be used for conveying liquids and thin as well as highly viscous materials, clean and abrasive stuffs with content of gases, liquids with foaming power containing fibrous materials and solids. Specification of using single pumps shall be negotiated with the Producer in order to design the best hydraulics according to pumped liquids and required parameters.

Design

Progressive cavity pump

Branches

Water resources management, civil engineering, mining industry, foodstuff industry, chemical industry
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2 3 4

EPT

obrázek není k dispozici
Pmax 0,6 MPa
max. diameter of grains 7 mm
max. length of particles 80 mm
Tmax 20 °C

Application

Progressive cavity pumps of EPT Series are destined for conveying liquids and other stuffs that can be thin or high-viscous, clean or abrasive, with tendency to foaming, and/or containing fibrous materials and solid particles. The pumps of EPT type are designed with a flange-type connection to a drive, which allows and facilitates choice of an electric motor, a gearbox and/or a variator. A branch of the suction casing can be turned radially in steps of 90°, the discharge branch is kept in rigidly fixed axial position.

Design

Progressive cavity pump

Branches

Agriculture, chemical, paper and pulp industries, civil engineering, mining
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos:

KDDF-050-51-N

obrázek není k dispozici
Qr 4 l/s
Hr 24 m
U 400 V
Tmax 35 °C
weight 35 kg with 10m cable

Application

Pumps are destined for pumping polluted wastewater with a content of sludge up to 30 percent and sand or similar materials of abrasive effect up to 30 percent by weigh. These pumps can be used to advantage for water drainage out of flooded spaces, cleaning boreholes up to 8”, as well as excavations, and so on.

Design

Submersible Sludge Pump

Branches

Water resources management, agriculture, open pit mines
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos:

KDDF-080-01-LR-E

Qr 8 l/s
Hr 19 m
U 400 V
Tmax 40 °C
weight 56 kg with 50m cable

Application

Submersible sludge pump in explosion-proof workmanship, destined for working in mines with methane occurrence (Group I – mine premises with danger of methane explosion, except of premises with high risk of methane explosion SNM3) and in premises with explosion hazard (Group II – premises other than mines with methane occurrence), zones 1 and 2 according to the ČSN EN 6079-10. Designation of explosion proofness is IM2ExdI/II2GExdIIBT4. Pump is destined for installation into wet pits and for pumping hydro mixtures with content of sludge, sand, coal dust, and so on.

Design

Submersible sludge pump

Branches

Water resources management, agriculture, mines and metallurgical plants
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2

KDDF-080-02-N

Qr 14 l/s
Hr 28 m
U 400 V
Tmax 40 °C
weight 73,5 kg with 50m cable

Application

Submersible sludge pumps are destined for explosion-proof environments, for pumping water polluted with a content of sludge, clay, sand, fine crumbles and similar materials of abrasive effect with the total portion of admixtures max. 30 percent by weigh. These pumps can be used to advantage in civil engineering for excavation and drainage works, removal of flood disaster consequences, etc.

Design

Submersible sludge pump

Branches

Water resources management, agriculture, civil engineering
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

Top Previous  1  2  3 
Items 13 - 18 from 18

Home | contacts

© Copyright 2009 SIGMA 1868 - all rights reserved - phone: 585 651 302, email: