Location: Pumps » Industry

Industry

32-GFTU-95-11-LA

Qmax 5,5 l/s
Hmax 11,1 m
U 400 V
Tmax 40 °C
weight 17 kg with 10m cable

Application

Pumps are destined for pumping polluted wastewater, faeces and sludge with the total portion of non-abrasive sludge dry residues max. 10 percent by weight, with a content of fine fragmented materials, as paper, street washoffs, or a smaller amount of loam, ash, sand, and so on. Thanks to its parameters and design this pump can be used to advantage in one-family houses and weekend houses, gardens, as well as in places with insufficient room (excavations, pits).

Design

Submersible sludge pump

Branches

House and garden, water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2

GFZF-050-02-N

Qmax 3,6 l/s
Hmax 23 m
U 400 V
Tmax 40 °C
weight 30 kg with 10m cable

Application

Pumps are destined for wet pit installation and for explosion-proof environments and they are destined for pumping wastewater, faeces, non-treated sludge and for disintegration of materials being contained in them (tatters, sanitary napkins, grass, straw, fragmented and fibrous materials of non abrasive character up to 5percent of volume). Pumps are not delivered for pumping liquids with a content of abrasive impurities, as sand, broken stone ballast, cords, synthetic fibres and textile fabrics, and so on. Pump GFZF is destined for its installation at the pit bottom.

Design

Submersible sludge pump

Branches

Water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

GFZF-050-03-LU-N

Qr 3,7 l/s
Hmax 18,5 m
U 400 V
Tmax 40 °C
weight 87 kg with 10m cable

Application

Submersible sludge pumps are destined for pumping liquids in explosion-proof environments containing rags of tatters up to size 50x50mm, sanitary napkins, fragmented long-fibrous materials (grass, straw, peels of fruit and vegetables. The volume of solids may be up 5 percent of a pumped liquid volume. The pump is not designed for pumping a liquid with content of abrasive admixtures (sand, broken stone ballast), thick strings and cords, synthetic fibres and textile fabrics, rubber, and so on. The pump is designed for loose-fitting at the pit bottom.

Design

Submersible sludge pump

Branches

Water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2 3

GFZF-080-03-N

Qr 12 l/s
Hr 17,2 m
U 400 V
Tmax 40 °C
weight 129 kg without cable

Application

Pumps are provided with a multi-vane impeller with a disintegrator-grinder and they are destined for pumping wastewater, faeces, non-treated sludge and for disintegration of materials being contained in them (tatters, sanitary napkins, fragmented and fibrous materials of non abrasive character up to 5percent of volume). Pumps are delivered in following workmanships of drive units: N – For explosion-proof environments Pumps GFZF are destined for their installation at the pit bottom.

Design

Submersible sludge pump

Branches

Water resources management, agriculture, mines and metallurgical plants
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2

GFZP-050-02-N

Qmax 3,6 l/s
Hmax 23 m
U 400 V
Tmax 40 °C
weight 30 kg with 10m cable

Application

Pumps are destined for wet pit installation and for explosion-proof environments and they are destined for pumping wastewater, faeces, non-treated sludge and for disintegration of materials being contained in them (tatters, sanitary napkins, grass, straw, fragmented and fibrous materials of non abrasive character up to 5percent of volume). Pumps are not delivered for pumping liquids with a content of abrasive impurities, as sand, broken stone ballast, cords, synthetic fibres and textile fabrics, and so on. Pumps GFZP are attached to the lowering gear in the pit.

Design

Submersible sludge pump

Branches

Water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1

GFZP-050-03-LU-N

Qr 3,7 l/s
Hr 18,5 m
U 400 V
Tmax 40 °C
weight 87 kg with 10m cable

Application

Submersible sludge pumps are destined for pumping liquids in explosion-proof environments containing rags of tatters up to size 50x50mm, sanitary napkins, fragmented long-fibrous materials (grass, straw, peels of fruit and vegetables. The volume of solids may be up 5 percent of a pumped liquid volume. The pump is not designed for pumping a liquid with content of abrasive admixtures (sand, broken stone ballast), thick strings and cords, synthetic fibres and textile fabrics, rubber, and so on. The pump is designed for attachment to the lowering device.

Design

Submersible sludge pump

Branches

Water resources management, agriculture
» Leaflet » Spare parts
» Service manual » Technical data sheet
» Photos: 1 2 3

Top Previous  15  16  17  18  19  20  21  22  23  Next Bottom 
Items 109 - 114 from 155

Home | contacts

© Copyright 2009 SIGMA 1868 - all rights reserved - phone: 585 651 302, email: